AFTERCARE

When you leave the shop, you will have a piece of Derm Shield protecting your tattoo and they will give you a second sheet to take home. You will notice that fluid will accumulate under the bandage during the first 24 hours; It is a mixture of plasma, ink and a minimal amount of blood, and is completely normal.

Approximately 24 hours after finishing your tattoo, you will change the bandage. To do so, follow the following instructions: 

Gently clean and pat dry the tattoo and surrounding area, ensuring there is no soap or any residue on the skin. With clean gloves, remove Derm Shield from the sterile pouch. Cut the Derm Shield to cover tattooed area plus a 1 to 2 inch margin from the edge of the tattoo. Peel off backing to expose adhesive side and position the Derm Shield over the tattoo with the adhesive side facing the skin. Gently apply using light pressure, starting from the center to the edges to eliminate air bubbles. Do not stretch the Derm Shield during application.

The first Derm Shield application should stay in place for 24 hours, depending on level of exudation. It is normal for blood and fluids to collect under the bandage. Leave the second piece of bandage on for 4 to 5 days.

Directions for Removal:

Gently peel the Derm Shield by pulling it slowly from the edge back over itself. Do not pull the bandage upwards.

I attach a link to the cream that I recommend to us: 

https://www.madrabbit.com/products/soothing-gel

Thank you for trusting my work!